8 Port Fast Ethernet Smart POE Switch
Overview
Hikvision

8 Port Fast Ethernet Smart POE Switch

SKU: DS-3E1309P-EI · CCTV P.o.E. 網絡機
Enquire for price

Hikvision 8 Port Fast Ethernet Smart POE Switch DS-3E1309P-EI

※ Price/category from ERPNext, content/add-ons from master Mongo.

Overview
Specifications

General

ShellMetal material, fan-free design
Net Weight0.35 kg (0.77 lb)
Gross Weight1.114 kg (2.45 lb)
Dimensions (W × H × D)170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Power Supply54VDC,2.22A
Installation ModeDesk-Mounted,Wall-Mounted
Max. Power Consumption120 W
Power Consumption in Idle10 W
Surge Protection6 kV

Network Parameters

Ports8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
MAC Address Table8 K
Packet Forwarding RateWhole-Device Performance: 4.17 Mpps Port Performance: 2.68 Mpps
Internal Cache4 Mbits
Switching CapacityWhole-Device Performance: 5.6 Gbps Port Performance: 3.6 Gbps

PoE Power Supply

PoE StandardIEEE 802.3af,IEEE 802.3at
PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 8
Max. Port Power30 W
PoE Power Budget110 W

Software Function

Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
VIP Port\
Port IsolationPorts 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
QoS\
Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP.
VLAN/
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating.
Port Rate-Limiting\
ACL\
IPSG\

Approval

EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Technical support

Need a solution or installation advice?

20 years of experience across CCTV / networking / access control — we help you pick the right model and plan the deployment.

Chat on WhatsApp →
Purchase & Return Policy
  • Brand-new genuine goods; return/exchange within 7 days if unopened.
  • No return for physical damage, opened software or consumables.
  • Contact us for a quote on bulk / project orders.
Shipping & Warranty Policy
  • Free local delivery over HK$2,000; ships in 1–2 business days.
  • Store pickup available; Macau via SF (freight collect).
  • Manufacturer warranty as stated on the product page.
WhatsApp · 即時 reply
×

[ Popup placeholder ]

Phase-9 promo / lead-capture popup 將喺呢度由 site_popups mongo collection 控制 active 狀態 + targeting rule。當前隱藏。