8 Port Fast Ethernet Smart POE Switch
Overview
Hikvision

8 Port Fast Ethernet Smart POE Switch

SKU: DS-3E1310HP-EI · CCTV P.o.E. 網絡機
Enquire for price

Hikvision 8 Port Fast Ethernet Smart POE Switch DS-3E1310HP-EI

※ Price/category from ERPNext, content/add-ons from master Mongo.

Overview
Specifications

General

ShellMetal material, IP40
Net Weight0.550 kg (1.21 lb)
Gross Weight0.950 kg (2.09 lb)
Dimensions (W × H × D)217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
Operating Temperature0 °C to 40 °C (0 °F to 104 °F)
Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity5% to 95% (no condensation)
Relative Humidity5% to 95% (no condensation)
Power Supply54 VDC, 2.22 A
Installation ModeDesk-Mounted,Wall-Mounted
Max. Power Consumption120 W
Power Consumption in Idle4 W
Surge Protection6 KV

Network Parameters

Ports8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
MAC Address Table16 K
Switching Capacity9.2 Gbps
Packet Forwarding Rate6.84 Mpps
Internal Cache4 Mbits

PoE Power Supply

PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortHi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
Max. Port PowerPort 1 to 2:90 W Ports 3 to 8:30 W
PoE Power Budget110 W

Software Function

Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
PoE WatchdogPorts 1  to 8: auto detect and restart the cameras that do not respond.
HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
System MaintenanceSupport DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.

Approval

EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
ChemistryCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
Technical support

Need a solution or installation advice?

20 years of experience across CCTV / networking / access control — we help you pick the right model and plan the deployment.

Chat on WhatsApp →
Purchase & Return Policy
  • Brand-new genuine goods; return/exchange within 7 days if unopened.
  • No return for physical damage, opened software or consumables.
  • Contact us for a quote on bulk / project orders.
Shipping & Warranty Policy
  • Free local delivery over HK$2,000; ships in 1–2 business days.
  • Store pickup available; Macau via SF (freight collect).
  • Manufacturer warranty as stated on the product page.
WhatsApp · 即時 reply
×

[ Popup placeholder ]

Phase-9 promo / lead-capture popup 將喺呢度由 site_popups mongo collection 控制 active 狀態 + targeting rule。當前隱藏。