Hikvision
26 Port Aggregation Switch
SKU: DS-3E1726-SI-16F8T2X · CCTV P.o.E. 網絡機
Enquire for price
Hikvision 26 Port Aggregation Switch DS-3E1726-SI-16F8T2X
※ Price/category from ERPNext, content/add-ons from master Mongo.
Overview
Specifications
General
| Shell | Metal material |
| Net Weight | 2.81 kg (6.19 lb) |
| Gross Weight | 3.73 kg (8.22 lb) |
| Dimensions (W × H × D) | 440.0 mm × 44.0 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'') |
| Operating Temperature | 0 °C to 45 °C (0 °F to 113 °F) |
| Storage Temperature | -40 °C to 85 °C (-40 °F to 185 °F) |
| Operating Humidity | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Power Supply | 100 to 240 V AC, 50/60 Hz, Max. 2 A |
| Max. Power Consumption | 40 W |
| Power Consumption in Idle | 7 W |
| Surge Protection | 6 kV |
| Installation Mode | Rack (equipped with mounting ears) |
Network Parameters
| Ports | 8 × Gigabit RJ45 port,16 × Gigabit fiber optical port,2 × 10G fiber optical port |
| MAC Address Table | 16 K |
| Switching Capacity | 88 Gbps |
| Packet Forwarding Rate | 65.47 Mpps |
| Internal Cache | 8.4 Mbits |
Software Function
| Port Isolation | Ports 1 to 26: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation group(s). |
| QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 1024 VLAN. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device. |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. |
| Port Rate-Limiting | Port rate-limiting is used for port bandwidth adjustment to prevent network congestion. |
| Storm Control | Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets. |
| DHCP Snooping | DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. |
| ACL | Port security strategy. Support up to 32 ACL entries. Support up to 64 configuration rules under all ACL entries. |
| IPSG | IPSG can control the security of port access device. Support port, MAC, IP binding. Support 64 security entries. |
| DDM (Digital Diagnostic Monitoring) | Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power. |
Approval
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
Technical support
Need a solution or installation advice?
20 years of experience across CCTV / networking / access control — we help you pick the right model and plan the deployment.
Chat on WhatsApp →Purchase & Return Policy
- Brand-new genuine goods; return/exchange within 7 days if unopened.
- No return for physical damage, opened software or consumables.
- Contact us for a quote on bulk / project orders.
Shipping & Warranty Policy
- Free local delivery over HK$2,000; ships in 1–2 business days.
- Store pickup available; Macau via SF (freight collect).
- Manufacturer warranty as stated on the product page.